Stair nosing for bricks and pavers
Very wide aluminium stair nosing
This stair nosing is suitable for all external steps.
Often steps are chipped and cracked and may require a wider tread than other stair nosings. Because of this need we have developed a nosing with a wide stair tread of 120 mm wide. This very wide aluminium stair nosing is popular for bricks, pavers, concrete and steel and is an alternative to FRP.
It is a very strong nosing and also has a 16 mm riser but 10 mm internally.
Almost all stair nosing need a flat level surface, perhaps this is an alternative to FRP industrial stair nosing
If the step is not level or we recommend installing with Soudal Hi Tac adhesive.
Carborundum inserts
What is carborundum? Silicon carbide, also known as carborundum, is a hard chemical compound containing silicon and carbon.
It is used as an abrasive for cutting, grinding, and polishing, as an anti slip additive for stair nosing
ORDERING
Cut to size and countersunk
We will cut to size and countersink the stair nosing for you. You will not have to pay for wastage.
Additionally we will supply plugs and screws.
Whilst the stair nosing can be ordered at the maximum length of 6.1 metres, TNT charge a very large fee for oversize freight and manual handling.
HINT!
If you are not sure about the exact measurements, average the lengths giving yourself a margin for error. You may them choose to cut them to the exact width onsite.
INSTALLATION
Wide aluminium stair nosing.
For the wide aluminium stair nosing we mechanical fixings for recessed stair nosing we recommend 12-gauge stainless steel screws suitable for countersinking. SUPPLIED WITH PLUGS AND SCREWS.
Any issues which may affect the stability or strength of the stair nosing must be addressed and corrected prior to installing any stair nosing profile. This nosing must be installed with screws and we would recommend green plugs. The nosing has staggered screw holes to enable a very secure installation.