Aluminium stair nosing

Aluminium stair nosing for all level hard surfaces

10 mm stair nosing

This aluminium stair nosing is excellent for steps that are concrete, ceramic tiles. The nosing is popular as a residential stair nosing


If the step is not level or it may have chips and cracks then this 10 mm aluminium stair nosing nosing  will not suit.


The better stair nosing would be 410 stair nosing internal and external stair nosing

Aluminium stair nosing


Carborundum inserts

12 series with carborundum inserts. Carborundum has a P5 slip rating. Our stair nosings come in two pieces, the extrusion or base and a separate aluminium insert which is 2.4 mm thick.

Santoprene rubber inserts

12 series with rubber inserts. Santo rubber insert have a P5 slip rating. A rubber insert is more robust, as PVC has plasticizers in it; which overtime may cause the insert to shrink.

Ripple trim inserts

The fine stylish and elegant solid ripple trim finish offers excellent slip resistance. Slip checked to AS 4586:2013.


Cut to size and countersunk

If you measure each step and give us a cutting list we will cut to size and countersink holes for no additional cost – You will not have to pay for wastage. 

Additionally we will supply plugs and screws.

Whilst the stair nosing can be ordered at the maximum length of 6.1 metres,      TNT charge a very large fee for oversize freight and manual handling.


If you are not sure about the exact measurements, average the lengths giving yourself a margin for error. You may them choose to cut them to the exact width onsite.



how to install stair nosingsFor mechanical fixings we recommend 12-gauge stainless steel screws suitable for countersinking. SUPPLIED WITH PLUGS AND SCREWS.

This stair nosing can be installed on all surfaces.

Any issues which may affect the stability or strength of the stair nosing must be addressed and corrected prior to installing any stair nosing profile.

Installation Guidelines