Stair Nosing Australia
Stair Nosing Perth – Australia supply and install a wide range of stair tread profiles. This stair nosing includes FRP nosing; stair treads and anti-slip stair strips and glow in the dark stair edge strips.
Stair Nosing Australia supply and install a wide range of stair tread profiles.
This stair nosing includes industrial nosing, stair treads and anti-slip stair strips as well as glow in the dark stair edge strips.
Stair Nosing Australia supply many stair nosing for steps.
This includes
• 10 mm stair nosing tread profiles
• Aluminium stair nosing profiles
• FRP stair tread industrial profiles
• Stair strips and stair edge trims
• Carpet and carpet tile stair nosing profiles.
Our stair nosing is manufactured in two parts; the actual nosing extrusion and a separate 2.5 mm anodised aluminium insert in a number of different colour combinations.
This provides additional strength. The inserts themselves can be installed on step edges as well, for an affordable solution to safety.
 |
 |
 |
 |
Description-10 series stair nosing suitable for all surfaces
This stair nosing is for internal and external stairs and is suitable for all surfaces. It is installed on ceramics, porcelain, terrazzo wood and concrete steps .
This nosing has a larger face therefore is often a favourite choice for steps which may be chipped and cracked. Additionally this is an excellent choice for steps that are bull nosed. It curves back in to the step , therefore minimises any chance of a slip hazard.
Stair Nosing and Stair Inserts
This 10 series stair nosing can be supplied in lengths of up to 6100 mm ,
or we can cut to size and countersink holes if required.
Most stair nosings are plugged and screwed. With this profile is is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo.
The profile does have hidden fittings for screws if you wished to install it on wood, concrete, and bricks-pavers
Description-11 series stair nosing suitable for all soft floor finishes.
This stair nosing is for internal stairs. It has a small rebate at the back which is suitable for cutting in of carpet tiles, or vinyl for a flush mount finish.
This nosing has a smaller tread therefore is often a favourite choice for carpeted stairs. Additionally this is an excellent choice for steps that may be bull nosed. The 35 mm riser curves back in to the step , therefore minimises any chance of a slip hazard.
This 11 series stair nosing can be supplied in lengths of up to 6100 mm , or we can cut to size and countersink holes if required at no additional charge.
Most stair nosings can be drilled plugged and screwed. With this profile is is best to glue onto hard surfaces such as ceramics , porcelain, and terrazzo.
The profile does have hidden fittings for screws if you wished to install it on wood, concrete, and bricks-pavers
12 series stair nosing with a 10 mm riser and 68 mm tread, suitable for all hard level surfaces.
This stair nosing is for internal and external stairs and is suitable for all level surfaces. It is installed on ceramics, porcelain, terrazzo, wood ,concrete steps, pavers, bricks and soft floor finishes
We manufacture the extrusions in Australia, and the inserts are factory made and fitted in Perth.
This stair nosing can be supplied in lengths of up to 6100 mm in lengths, or we can cut to size and countersink holes for you if required.
The 12 series stair nosing is AS1428 2009 Compliant
Stair Nosing Australia will provide a no obligation on-site quotation.
Most stair nosings are plugged and screwed. With this profile is is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo.
The profile does have hidden fittings for screws if you wished to install it on wood, concrete, and bricks-pavers
13 series – Description recessed stair nosing
58 mm Tread with a 10 mm riser .
This recessed stair nosing is designed to be installed in a step where a rebate has been made.
It is the same as the popular 12 series, but this stair nosing can be flush mounted because it is recessed into the rebate. The 412 on the other hand cannot be rebated as it diminishes at the back and is surface mount
With this profile it is best to glue on hard surfaces for example porcelain, ceramics and terrazzo.
This is a recessed stair nosing therefore it will need to be glued but NOT with ceramic tile adhesive. You may also screw and plug into wood or concrete if required.
The profile does have hidden fittings.
Description- 14 series Stair Nosing
Stair Nosing- 75 mm Tread with a 35 mm riser diminished rake at back
We often refer to the broadloom or tufted carpet being installed in a “water fall” fashion. The ribbed under surface of the stair nosing grips the carpet firmly to the substrate. This is required in instances when the broadloom carpet is quite thick or perhaps may have ab underlay. As an alternative, stair nosing 17 series is also suitable for broadloom carpet [waterfall].
14 series – 75 mm Tread with a 35 mm riser diminished rake at back
We often refer to the broadloom or tufted carpet being installed in a “water fall” fashion. The strong ribbed under surface grips the carpet firmly. This is required in instances when the broadloom carpet is quite thick.
As an alternative, stair nosing 17 series is also suitable for broadloom carpet with a riser of just 16 mm.
Most stair nosings are plugged and screwed, especially with stair nosing which are going to be installed on carpet. This stair nosing is not suitable for any hard surface. It must be drilled plugged and screwed as it is into carpet. The great thing about this nosing is that t has staggered holes at the front and the back for maximum strengths
The profile does have hidden fittings for screws.
Description-15 series stair nosing suitable for all hard surfaces such as pavers, concrete and bricks.
This stair nosing is for internal and external stairs and is suitable for all surfaces. With its wide tread it is often used on stairs that need remedial repairs. The old steps may include brick pavers, concrete which may have chipped or cracked edges. The wide tread covers these types of steps safely.
This 15 stair nosing can be supplied in lengths of up to 6100 mm , or we can cut to size and countersink holes if required.
Most stair nosings can be drilled plugged and screwed. With this profile is is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo. On concrete, wood, pavers, bricks it is best to drill, plug and screw.
The profile does have hidden fittings for screws if you wished to install it on wood, concrete, and bricks-pavers
Description-16 series is designed for carpet tiles, and vinyl
This stair nosing for carpet and vinyl is for internal suitable for internal staircases.
This stair nosing is unusual in that is has a large 35 mm rebate at the front to easily install the stair nosing by tucking the carpet tile into the rebate. Other stair nosings only have a 10-20 mm rebate which is too small and makes installation awkward. This is also suitable for vinyl plank, and with a combination of inserts looks great!
Stair nosing for carpet and vinyl
This 16 series carpet tile and vinyl stair nosing can be supplied in lengths of up to 6100 mm , or we can cut to size and countersink holes if required.
Most stair nosings can be drilled plugged and screwed. With this profile is is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo.
The profile does have hidden fittings fo r screws if you wished to install it on wood, concrete, and bricks-pavers
Description-17 series stair nosing suitable for vinyl and carpet tiles
This non-slip stair nosing is suitable for carpet tiles and vinyl. The stair nosing is very slim in design and therefore does not dominate the appearance of the stairs. ` We have found that the additional 6 mm on the face gives extra strength to the nosing and covers the riser much better than a typical 10 mm stair nosing. It does measure 10 mm from the inside The rebate at the back is designed for vinyl or carpet tiles.
This 17 series stair nosing can be supplied in lengths of up to 6100 mm , or we can cut to size and countersink holes if required.
Most stair nosings can be drilled plugged and screwed. With this profile is is best to drill, plug and screw into soft floor finishes..
The profile does have hidden fittings.
The correct adhesive must be used. We also recommend an application of Soudal Hi Tack Adhesive.
Description- 18 series Stair Nosing
Unique stair nosing ! This is a really rare nosing to find. 18 has a 10 mm riser. Almost certainly the reason why this stair nosing is hard to find is the size of the rebates at the front and the back.
Once again because the flooring finishes will be “cut in” the stair nosing sits flush o0n the steps. When installed it offers maximum safety for all thick flooring finishes.
Dimensions of 18 which is suitable fore thick flooring finishes.
Most stair nosings are plugged and screwed. With this profile is is best to glue on hard surfaces such as ceramics , porcelain, ceramics and terrazzo
When installing on soft floor finishes you must drill, plug and screw.
Description-19 series stair nosing suitable for all hard surfaces
This nosing is 120 mm wide and has two inserts. The first is a compliant 54 mm insert. The one at the back is 12 mm.
Many customers need the wide tread in slippery environments where the wider tread offers more stability. A combination of HAZARD YELLOW provides safety and the nosing the compliant !
Stair Nosing and Stair Inserts
This 19 series stair nosing can be supplied in lengths of up to 6100 mm , or we can cut to size and countersink holes if required.
Stair Nosing Australia will provide a no obligation on-site quotation.
Most stair nosings are plugged and screwed. With this profile is is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo.
The profile does have hidden fittings for screws if you wished to install it on wood, concrete, and bricks-pavers.
Description- 20 Series Stair Nosing
A very minimalist design designed for recessing into steps or surface mounting. Very petite, highlights the edge step by providing visual contrast.
This nosing provides safety without looking too commercial.
The stair nosing has several choices in terms of colour combinations.
With this profile is is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo as the fittings would be seen if screwed from the top.
The correct adhesive must be used. We also recommend an application of Soudal High Tack Adhesive.
Glow in the dark stair nosing
Profile 21 is a glow in the dark stair nosing.
This means that the edge glows in the dark. The nosing has a strip on the edge made of a resin which charges in normal light or sunlight.
It is designed to illuminate step edges for additional safety.
The important feature is that the inserts are separate. This means that the mechanical fittings are hidden.
Some other nosings you have to drill from the top, so the screws are always visible.
PVC Anti Slip Strip:
• Black, Pewter, Apeo, Yellow, Red, Beige, Tan, Terracotta, Brown, Green & Blue
• SCR Solid Strip with Silicon Carbide Grit in Black, Yellow & light grey
• Aluminium Ripple Trim – Black & Clear (silver)
Aluminium Stair nosings with Luminous Strip & Aluminium Inserts 75mm x 10mm
The stair nosing has hidden fittings assisted by strong double sided tape. We recommend you use Soudal fix all, not construction adhesives. 
Description-Profile 16 stair nosing suitable for all hard surfaces
This stair nosing is suitable for internal and external stairs and is suitable for all hard surfaces. It is installed on ceramics, porcelain, terrazzo wood and concrete steps .
Profile 16 has a wider tread and has a ribbed under surface making it extremely robust. With a 10 mm riser it is AS1428 2009 compliant. The stair nosing is surface mounted, and diminishes at the back, with no trip hazard
Profile 16 dimensions
This stair nosing can be supplied in lengths of up to 4300 mm , or we can cut to size and countersink holes if required.
Standard inserts are solid black carborundum, yellow and black carborundum tape
Most stair nosings are plugged and screwed. With this profile it is best to glue on ceramics such as hard surfaces for example porcelain, ceramics and terrazzo.
The profile does have hidden fittings for screws if you wished to install it on wood, concrete, and bricks-pavers
FRP stair nosing and stair strips provide maximum slip resistance in industrial and marine environments. High salt resistance, UV stability, and our products are made of SOLID FRP, not galvanised on the back.
FRP stair nosing and stair strips provide maximum slip resistance in industrial and marine environments. High salt resistance, UV stability, and our products are made of SOLID FRP, not galvanised on the back.
Compliant 54 mm stair nosing inserts for ALL stair nosing
Stair inserts available in carborundum, epoxy, glow in the dark; 18 designs
