Stair treads for thick carpet
Broadloom carpet is woven on a loom, and is essentially made as a continuous broad length usually about 3.6 metres. Installing broadloom carpet on stairs is often more complex than carpet tiles due to its width,.
Stair nosing for carpet can be hard to find which makes this nosing unique
Other nosings that are suitable for thick carpet is the 10 series. The 16 series is also suitable for carpet tiles.
READ SPECIFICATIONS
Stair treads for thick carpet
- Alloy: 6060, Temper: T5
- Finish Anodised Clear – 25Um/Black/Sovereign Gold
- Tread width 85 mm….
- Front Depth 30 mm
- Tread thickness 4.8 mm
- Inserts Carborundum – Epoxy – Santoprene-Aluminum ripple trim
- 2 Years (As per Stair Nosing Australia’s standard warranty conditions)
- Slip rating P5 classification (Highest available carborundum and epoxy) P4 aluminum ripple trim and santoprene rubber
- Code compliance AS1428 2021 Revised
Check floor finish colour for luminance contrast requirements LRV values
- Fixing method Screw fixed only
- Surface mounted onto carpet finishes
See product data sheets below
Santoprene rubber inserts
Sovereign Gold bases are subject to a minimum order quantity.
Aluminium ripple trim inserts
Sovereign Gold bases are subject to a minimum order quantity.
ORDERING
Cut to size and countersunk
We will cut to size and countersink the stair nosing for you. You will not have to pay for wastage.
Additionally we will supply plugs and screws.
The stair nosing can be ordered at the maximum length of 4.2 metres. TNT charge a very large fee for oversize freight and manual handling.
HINT!
If you are not sure about the exact measurements, average the lengths giving yourself a margin for error. You may them choose to cut them to the exact width onsite.
INSTALLATION
For mechanical fixings we recommend 12-gauge stainless steel screws suitable for countersinking. SUPPLIED WITH PLUGS AND SCREWS.
This stair nosing can be installed on thick flooring finishes such as carpet.
Any issues which may affect the stability or strength of the stair nosing must be addressed and corrected prior to installing any stair nosing profile. This nosing is a SCREW FIX ONLY.
Drill Bit sizes
- Pilot hole 2 mm drill bit
- 4.5 mm drill but for red plugs
- 6 mm for green plugs