Commercial stair tread nosing

Stair nosing for commercial use

Additionally, commercial stair nosing enhances step visibility; moreover, it protects stair edges from heavy use and, as a result, reduces the risk of slips and trips in busy business environments.

This nosing differs from our other nosing in that the face is straight.

There are two base colours that you can choose from. Anodised clear and black.

We supply this with countersunk holes, which gives you the option to screw, or you may choose to glue. We supply a roll of carorundum tape which you can install on site. The mechanical fittings are hidden.]

We offer this product as a cost effective stair nosing.

Stair nosing for all hard surfaces

Carborundum Tape Profile 450

We offer stair nosing with tough carborundum and soft Santoprene rubber inserts. These inserts give a strong grip and help people stay safe on stairs, even when wet or dry. The carborundum insert stands up to lots of use and works well in busy places. The Santoprene rubber insert bends easily and makes each step softer and more comfortable. Each stair nosing has a strong base that lasts a long time. The 2.4 mm-thick aluminium insert does not rust and can take daily use.

Santoprene rubber inserts Profile 350

The 350 series features rubber inserts. These inserts deliver enhanced performance. Santoprene rubber inserts also earn a P4 slip rating. This ensures reliable slip resistance. Rubber inserts provide more durability. In contrast, PVC contains plasticisers and may shrink over time. Therefore, rubber inserts offer a longer-lasting and more dependable solution.

ORDERING

Cut to size and countersunk

If you measure each step and give us a cutting list we will cut to size and countersink holes for no additional cost – You will not have to pay for wastage. 

Additionally we will supply plugs and screws.

When it comes to the stair nosing, you can order it up to 4.2 meters long. Just keep in mind that TNT tends to charge quite a bit for oversized shipping and manual handling, so it’s something to think about.

Quick tip! If you’re feeling unsure about the exact measurements, try averaging the lengths and leave a little room for error. Then you can always cut them to fit perfectly on-site!

INSTALLATION

how to install stair nosings

When it comes to putting your stair nosing in place, we suggest using 12-gauge stainless steel screws that are perfect for countersinking. You’ll find that plugs and screws are included with your order, so you’re all set!

You can install this stair nosing on pretty much any surface you have in mind.

Just a friendly reminder: if there’s anything that could affect the stability or strength of the stair nosing, it’s a good idea to sort that out before you start the installation.

Drill Bit sizes

  • Pilot hole 2 mm drill bit
  • 4.5 mm drill but for red plugs
  • 6 mm for green plugs

Installation Guidelines

 

DATA SHEETS

Product Data Sheet 10 series

Slip Test Rubber insert

Carborundum Insert Slip Test

Aluminum Insert Slip Test

Maintenance

Install guidelines

 

GALLERY

Home

VIDEOS

AS STANDARDS