Recessed stair inlay
This stair inlay creates a flush finish when recessed into a floor finish.
Appearance: It creates a clean, flush appearance on the stair edge.
Installation: Often used with hard flooring like tile, wood, or laminate where a flat surface is desired.
Contrast to other nosing: Unlike “surface mount” nosing which has a visible lip or edge that extends beyond the tread
Because the stair nose sits level with the floor, it doesn’t protrude, thereby minimizing the chances of catching a foot on the edge. In addition, flush mount stair nosing provides a modern and clean aesthetic, which ultimately contributes to a more streamlined look in your space.
Flush stair nosing will give a professional, clean elegant finish to your stairs.
ORDERING
Product Overview
- Customised Cutting and Installation
- First, we cut and countersink the stair nosing to your size, so you receive exactly what you need.
- Cost-Effective and Convenient
- Additionally, you don’t pay for wastage, making the process cost-effective.
Ordering Information
You can order this recessed inlay nosing up to 3.6 metres; however, be aware that TNT charges high fees for oversized freight and manual handling.
HINT!
Measurement Tips
If you are unsure of the exact measurements, simply average the lengths and leave a margin for error. Finally, you can cut the nosing to the exact width onsite for a perfect fit.
INSTALLATION
Installation – Rebated Step
The groove in the stair can be set back at a maximum of 15mm from the front edge of the step. The groove should be 52mm wide x 8mm deep. The inlay is glued into the groove using a polyurethane based adhesive. (typical glues are: Sikaflex 11FC, Soudal T-Rex or RiteTack.
The groove in the stair can be set back at a maximum of 15mm from the front edge of the step. The groove should be 52mm wide x 8mm deep. The inlay is glued into the groove using a polyurethane based adhesive. (typical glues are: Sikaflex 11FC, Soudal T-Rex or RiteTack.