Stair Nosing Australia
Stair Nosing Australia supply and install a wide range of stair nosing .
- This stair nosing includes
- Internal and external products
- Aluminium nosing profiles
- FRP tread and industrial profiles
- Carpet and carpet tile stair profiles and
- glow in the park products.
Our nosings are made of two parts The actual nosing base and a separate 2.5 mm aluminum insert. These are available in a number of different colour combinations.
Consequently, this provides additional strength, as well as the inserts themselves can be installed on step edges as well.
All STAIR NOSING PRODUCTS
10 series
Designed for all surfaces
This product is for internal and external stairs and is suitable for all surfaces. It can be installed on
- ceramics,
- porcelain,
- terrazzo
- wood
- concrete steps
- and soft floor covering finishes.
11 series
Designed for vinyl and carpet
11 series is suitable for soft floor finishes such as 2 to 3 mm carpet tile.
Additionally it is designed for suitable for sheet vinyl or vinyl tiles for plank.
Also the nosing has a 2 mm rebate at the back . For instance when you cut the vinyl into the back rebate, the nosing sits flat on the step.
12 series
For all level hard surfaces
This stair nosing is suitable for internal and external stairs Because it has a small turndown, it needs to be installed on hard surfaces, yet it can be installed on
- ceramics
- porcelain
- terrazzo
- wood
- concrete steps
13 series
Designed for recessing
This recessed stair nosing is designed to be installed in a step where a rebate has been made.
In other words this stair nosing can be flush mounted, meaning it sits flat on the step.
In contrast to 13B this will allow you to use screws.
14 series
14 for thick flooring finishes
The ribbed under surface of the stair nosing grips the carpet firmly to the substrate.
For instance, this is required in situations when the broadloom carpet is quite thick or perhaps may have an underlay. Consequently it offers extra strength.
15 series
For all surfaces-wide tread
With a very wide tread this nosing provides maximum stability on steps edges. Most importantly this is 98mm wide. Subsequently it is is one of the widest nosings available.
Above all it is suitable for all surfaces.
16 series
Designed for carpet tiles
The nosing has large 35 mm rebate at the front to easily install the stair nosing. And it has a rebate at the back.
Therefore it is easy to tuck the carpet tiles into the rebates. AS1428 2021 compliant.
18 series
Thick flooring and substrates
Suitable for finishes that are quite thick such as;
- rubber
- acoustic vinyl
- thick carpet tiles.
Furthermore it is IDEAL for 10 mm ceramic tiles.
19 series
Very wide tread
As with the 15 series, this is a very wide stair nosing. This means that this nosing can be used on all hard surfaces.
For example it is often used as a door threshold.
20 series
Very elegant nosing
A very elegant, narrow stair nosing for hard level surfaces, such as concrete, ceramics and wood.
Likewise the 12 series is similar.
Glow in the dark nosing
All hard surfaces
Glow in the dark stair nosing is a popular way to highlight the edge of any step.
It provides a visual contrast and is fully compliant with Australian Standards.
FRP industrial strips
All hard surfaces
This is an FRP industrial stair strip.
Because it is FRP it provides maximum slip resistance in industrial and marine environments. Additionally it has high salt resistance, it is UV stable.
Most importantly our products are made of SOLID FRP.
FRP industrial nosing
All hard surfaces
![Industrial stair nosing](https://stairnosingaustralia.com.au/wp-content/uploads/2021/04/Image-300x205.jpg)
Profile 70 FRP stair nosing
FRP stair nosing and stair strips will provide maximum slip resistance .
Consequently it is often used in industrial and marine environments; our products are made of SOLID FRP.
Hazard Tactile Indicators
Peel and stick
Hazard and Directional peel and stick pads guide people through open areas by providing a tactile indication of the path ahead and warning of upcoming hazards.
Directional Tactile Indicators
Directional peel and stick pads guide people through open areas by providing a tactile indication of the path ahead.
They warn people of an upcoming change of direction.
Fiberglass tactile hazard pads
These fiberglass re-enforced hazard tactile Pads are 600 mm x 300 mm and are easily fixed with 6 screws. Designed for most applications and are an easy, and quick installation that is very robust and strong.
Stainless steel tactile studs
Manufactured from solid quality material with the highest slip rating. Our stainless steel studs are engineered to withstand even the harshest outdoor conditions while maintaining their sleek, modern look.
Brass tactile studs
Studs are individual discrete studs, or dots that use an expansion anchor or stem to fix to the pedestrian pathway.
They are drilled directly into the ground.
Polyurethane Tactile Studs
Tactile indicators are designed to warn pedestrians of upcoming hazards. They are anti-slip, easy to install and made from long-lasting high impact thermoprene.