FRP Strips for steps
You can comply with Australian Stair Nosing Standards affordably by installing an FRP non-slip strip on the edge of steps. This option serves as an effective alternative to a full anti-slip stair nosing. Additionally, using a non-slip strip enhances safety while remaining cost-effective.
FRP anti slip strips.
Anti slip Stair strips and FRP strips for steps.
Set the FRP strips for steps back no more than 15 mm from the edge of the step. This way, you will create a clear visual contrast with the stair tread.
The FRP strips are 50 mm wide.
They are 3 mm thick, and taper down on each side.
These FRP anti-slip strips provide exceptional and lasting slip resistance. They consist of a resilient composite material specifically engineered to perform well in harsh environments, including high exposure to saltwater. During manufacturing, we incorporate silicon carbide to create a robust, permanently bonded gritted surface. As a result, these strips enhance safety in even the most demanding conditions.
It is important to note that this is SOLID FRP ; it does not have a galvanized backing, which cause problems with delamination.
The FRP 50 mm strips comply with Australian Standards AS1428.2021. These Anti Slip Strips have been slip resistance tested to AS 4586:2013
ORDERING
Cut to size and countersunk, FRP strips for steps.
We will cut to size and countersink the stair nosing for you. You will not have to pay for wastage.
Whilst the stair nosing anti-slip strips can be ordered at the maximum length of 4.3 metres, TNT charge a very large fee for oversize freight and manual handling. It is best to provide us with a cutting list; this will save you time and money.
HINT!
If you are not sure about the exact measurements, average the lengths giving yourself a margin for error. You may them choose to cut them to the exact width onsite.
INSTALLATION
Most FRP stair treads are screwed. We have found on hard surfaces such as porcelain, ceramics and terrazzo it is possible to glue only. The correct adhesive must be used.
When using the FRP stair strip very important that the external stairs where pavers or concrete aggregate have been use are level and straight.
We also recommend an application of Soudal Hi Tack Adhesive.
PRODUCT DATA SHEETS
GALLERY
