Stair nosing for carpet and vinyl

Stair nosing for vinyl

This 417 stair nosing for vinyl profile is designed for carpet tiles and vinyl. It has a 2 mm rebate at the back.

This allows for the stair nosing to sit flush on the step tread. The riser of the nosing is 16 mm which appeals to clients who don’t necessarily want a longer face.

Anodised sovereign gold ripple trim insert

Anodised sovereign gold insert with black carb

Epoxy 4 bar anodised black with black inserts

Epoxy 4 bar anodised sovereign gold with black inserts

Epoxy 4 bar anodised clear with black inserts

Epoxy 3 bar anodised black with black inserts and 1 bar glow in the dark

Epoxy 4 bar anodised clear with glow in the dark inserts

1of13

Base colours
Dimensions
Inserts for bases
How to install
Designer

Description-417 stair nosing suitable for vinyl and carpet tiles

This non-slip stair nosing is suitable for carpet tiles and vinyl. The stair nosing is very slim in design and therefore does not dominate the appearance of the stairs. ` We have found that the additional 6 mm on the face gives extra strength to the nosing and covers the riser much better than a typical 10 mm stair nosing. It does measure 10 mm from the inside The rebate at the back is designed for vinyl or carpet tiles. If you needed the 10 mm face then you should look at 416 nosing

Stair Nosing and Stair Inserts

This 417 stair nosing can be supplied in lengths of up to 6100 mm , or we can cut to size and countersink holes if required.

Stair Nosing Perth will provide a no obligation on-site quotation.

Most stair nosings are plugged and screwed. With this profile is is best to glue on hard surfaces for example porcelain, ceramics and terrazzo. This is a recessed stair nosing therefore it will need to be glued.

The profile does have hidden fittings.