FRP Industrial stair nosing

FRP industrial stair nosing Profile 70 

The FRP industrial stair nosing is designed for  industrial, commercial and marine environments where tough stair nosing is required.

The FRP stair nosing   70 is an industrial stair nosing suitable  for  areas which require high non slip stair safety solutions and it is UV stable and salt resistant. The dimensions are 70 mm on the tread and 25 mm on the face.

FRP industrial nosing

FRP industrial stair nosing

FRP industrial stair nosing

Profile 70 is used in all commercial, industrial, mining, and industrial industries.

This FRP industrial stair nosing is a  versatile stair tread and has been installed  in residential buildings, high rise apartment stairwells, fire escapes, universities and schools.

1.FRP profiles have a high resistance to corrosion
2.The nosing has a has a P4 slip rating
3.The stair nosing is light but very string.
4.The product lasts a long time and requires little  maintenance

The nosing comes in 2 sizes as below;

  • Profile 70-25  has a 70  mm tread and a 25 mm face and
  • Profile 70-10 has a 70  mm tread and a 10 mm face

frp stair nosing

frp stair nosing

The 10 mm stair tread complies with AS1428 2009 Australian Standards and both are available in black and hi-vis yellow.



The maximum length the stair nosing can be ordered in is 3600 mm for the 70mm but it is important to note that some couriers charge high prices for shipping long lengths.

FRP industrial stair nosing Sydney


 Cut to size and countersunk
We will cut to size and countersink the stair nosing for you which means you will not have to pay for wastage.


The stair nosing can be ordered at the maximum length of 3.6 metres, TNT charge a very large fee for oversize freight and manual handling. It is best to provide us with a cutting list which will  save you time and money.


If you are not sure about the exact measurements, average the lengths giving yourself a margin for error. You may them choose to cut them to the exact width onsite.


Most FRP stair treads are  screwed into place. We have found on hard surfaces such as porcelain, ceramics and terrazzo tiles, it is possible to glue only and in addition we recommend the correct adhesive be used.

When using the FRP stair tread with the 10 mm face  is very important that stairs are level and straight and we recommend an application of Soudal Hi Tack or T-Rex Adhesive.

Installation Guide